Our newly-purchased Miele dishwasher was DOA. We had to call the service department, who sent out someone to repair it the same day. When we called, they had us put the dishwasher into service mode, which will tell you which error (”technical fault”) is causing your dishwasher to fail.

These instructions are for a G2140* model Miele Dishwasher

• turn off dishwasher
• hold start
• turn on dishwasher with start button still pressed
• release start button
• press start button 3 times, quickly, holding it in the last time, until the Start/Stop light flashes (no other lights should be flashing)
• Start/Stop should flash for four seconds
• press program button.
• This should cause the rinse LED to flash in a series of long and short blinks. Count the long blinks. Those are the tens digit of the fault. The short blink are the ones digit. For example, ours flashed one long blink and four short blinks, which meant we had a F14 fault.
• You’ll have to figure out what the faults mean. We only know that F14 means “Water intake fault with heater or circulation pump”, or something like that. Our circulation pump was clogged.
• Now, to delete the fault, press and hold the start/stop button for five seconds.

Filed under: support |
Tagged: debugging , dishwasher , howto , Miele , ServiceMode